DVD Media Quality Scans

[200mph]

Tweet

NERO - TOOLS - CD DVD SPEED - DISC QUALITY . now to get the disc quality thing on there is a registry that u have to change google abt that

[TheZenMaestro]

Ok will check that.

[pronman123]

can u tell me whether national dvd's are good enough??
cos national costs me 9.5 bucks/dvd and verbatim is 13bucks/dvd
also plz explain the price difference in terms of quality difference

[TheZenMaestro]

Well there is a little price difference but remarkable difference is the longevity. I'd suggest better spend hose 3.5 bucks.

[ronnie_gogs]

Media : Sony DVD+R
ID : D21
Burner : Moser Baer DH-20A6S
Burn speed : 8X



My first scan....burnt a image which was 2988 MB only...

so what do u guys think abt the quality

[ronnie_gogs]

Another Scan...

This time I did 4.36 gb burn at 8x



General Information
Drive: MOSER BAER DH-20A6S
Firmware: 7M73
Disc: DVD+R (SONY D21)
Selected speed: 8 X
PI errors
Maximum: 13
Average: 4.77
Total: 51693
PI failures
Maximum: 2
Average: 0.05
Total: 486
PO failures: n/a
Jitter: n/a
Scanning Statistics
Elapsed time: 9:58
Number of samples: 133216
Average scanning interval: 1.07 ECC
Glitches removed: 0

[Mediahome]

decent burns

[Free Radical]

Verbatim 16x DVD+R Silver Matt (MCC 004) bought through Mediahome
Top most (first) disk from spindle of 50

Burnt at 4x with 40x100mb files and scanned at 8x

Drive used for burning and scanning (I know ) :
Samsung SH223F DVD-RW @ ST00 RPC1-FR-RLR-BS-ROMD-E






Nice media
Avg. PIF: 0.00
Max: 2.0
Total: 348 for 4000 MB

[Free Radical]

Second disk from the spindle. Even better results.
Both discs burnt using ImageBurn and scanned using DiscSpeed






Total PIFs only 269

[Techie#1]

using a LG DVD Burner,so Nero disc quality test right now NOT possible, (Bad Luck ), but is this transfer rate test OK???
DVD Writer Model- LG HL-DT-STDVD-RAM GH22NP20 (PATA IDE),F/W -1.02
DVD DISC - Verbatim 16x DVD+R (MCC 004)
DVD Burnt@ 4x.
So, the Main Question is >>> Is the DVD BURN/WRITE OK ??? ** Since my LG Drive cannot use the Nero Disc Quality Test, Hence after Burning data, i use the Data Verification process to check the discs.. ...now in the above disc( the transfer Graph of which i 'm using above), in the Data verification process, in the final report box,there was red Cross & a comment that "Sector 305932 on disc has different content to source". Now what can i make of this comment?....is this some kind of Burn failure of this disc or what ?...i however made a scan disc test of the disc(through Nero CD-DVD speed) & it however has come out Ok, as u can find below:

So now friends,can u help me out in determing whether the Disc burning is GOOD/Ok (by looking @data transfer rate,etc) & also just tell me, whether there were any considerable error in the writing stage(as in the data verification comment) Plz help me out, would be MOST thankful!

** can u guys also tellme, whether there is an Actual Working hack for my LG DVD Writer "HL-DT-STDVD-RAM GH22NP20" that would be able to set the said dvd drive for using the Nero disc Quality test ???

TIA !!!

[Chief-Techie]

^^^^ LG's are not scanners,tough luck with that

get that dvd scanned by a say lite-on drive... that will tell the true story

[Techie#1]

^^ but what about the Data verification comment "Sector 305932 on disc has different content to source".Is that normal or NOT?
..however, the scan disc report is pure clean!
* Do note that this disc is First One of the 50 pack cake box!
...on the hindsight,cant u guess by the transfer rate test, is the Burnning OK???
..yeah i need this helpful reply fast, coz i need to burn 6 More DVD's by tonight on this same drive, so i just need the Go ahead!(cant find any other drives rightnow or tonight)

Help guys/friend, this is quite important for me!!!!

*damm luck,never knew abt LG DVD Burner's Dark side b4 purchase

[Techie#1]

^^^* bump*^^^

[MohitPreet]

yeh lo delete kar dia manu bhai!!

[manu1991]

^ WTH does that have to do with the thread